Subject | Text |
Base station | Just re reading your post.
The base station will not only charge the handset but also picks up th |
PACE PPS101BE solder station Soldering hadset | I have a PACE PPS 101BE solder station which I need a new soldering iron handset. I have contacted |
|
Soldering station | Ravi,
How do I post pictures of the soldering station here. Or send me a different private email |
For Sale - Temperature Controlled Soldering Station | Tenma Model 21-147
$50.00
Featuring adjustable temperature and a variety of available tips, th |
Yamaha Cinema Station Surround Sound - DVR150 | DVD Player skips - - - sometimes it reads and does not recognize a disk, sometimes it reads and goes |
Lodestar L502850 rework station, no air, fixed | No air output, no pump, no LED on air side.
Problem traced to 220uf 16v C6, relay drive anchored to |
about power supply-hp station 2600B | Would someone like to help me for the schematic diagram of the power supply of the HP station 2600 |
Re: desoldering tool but good one | [quote:e4e90fc4ae="Peter Rowe"]I am looking for good desoldering tool for my small service, having 4 |
| Hi,
I fixed this very same proble this morning. I found this post looking for a schematic this even |
| Check the flyback capacitor(s), those are usually 5-10 nF polypropylene capacitors connected from th |
| We had a bunch of Sony 27's that had similar problems at a call center. They all had bad solder join |
sony str de 475 bad tuner | Hi guys;long time no see ; i need your help,
i have here a STR DE 475 sony receiver and it runs go |
| i would like to add at this stage resoldering of the memory chip on this module is very difficult ev |
Ericsson DECT DT200 and BS230 | Hi everybody,
I'm repairing an Ericsson DECT phone that has a intermittent problem on the mic.
Do |
Re: Please help : My Panasonic television isn't well at all! | [quote:a0ee332b43="ArthurLee"]About 3 weeks ago, my Panasonic TV started to switch to standby mode q |
| I think you misunderstood me about the plug. The plug I was takling about is at the rear of the CRT |
| you may not have hit all the solder connections. sometimes you have to remove the old solder and us |
|
Sony AE5 Chassis Nightmare! | Sony KV28FQ75A (AE5 Chassis).
This set came in with a blown chopper IC and 0R1 resistor and blown |
Sony SA3ES tuner display not working | I would very grateful for any information or diagrams regarding the SONY SA3ES tuner. The unit itse |
Manually tuning Philips DC710/64S | I would be grateful if anyone could help me: I bought an FM transmitter for my MP3 player, but it r |
| If the picture is shrinking, it may just be the filter capacitors have dried out. If you know how to |
| problem is both modes ,video and normal tuner operation.yes there is sound the picture is just dark |
| I'll always dip new tips in a bit of solder. So the tip gets a protective coating.
Also, when cle |
Panasonic TV TX-25MD1 | Panasonic TV. TX-25MD1
Hi there are two problems with this nine-year-old set.
A few R.G.B. fly- |
| my friend you just need the remote control to memorize the stations and to get in the menu.with the |
| Wait until the "----" appears. Use buttons 1-4 to enter position 1-4 (i.e. press 1 to incr |
answer | Tanks for the advice...Hey Space i think you'll have a problem of bad solder joint's 8) |
D28 BY299 | Thank you for everyone's help with this.
I found the problem to be D28 being incorrectly oriented |
power problems on a sony kp-41ds1u | hi there
i have a sony rear projection tv kp-41ds1u with a power fault.
i turned the tv on one |
New IC RS2004FS | New IC RS2004FS HK7x.00/pcs;LA6508 HK1x.00/pcs;or GAMECUBE Screwdriver HK1x.00/pcs...;Please Contact |